Product Description
Product Parameters
Chevron Rubber Conveyor belt for Mining industry
|
Type |
EP belting |
|
Textile Type |
EP 100— EP 500 |
|
Features |
It can be applied in transporting bags, bulks materials in slope ranking from 0-40 degree. It also improves freight capacity preventing sliding |
|
Standards of Performance |
GB/T7984-2001 |
|
Format |
Chevron shape, cleat shape, U shape, herringbone shape, cylinder shape etc. |
|
Width of belt |
300-2000mm |
|
Height of pattern |
5,10,15,20,25,30mm |
|
Distance between patterns |
125,200,250,330,400,500mm |
|
Marks |
Patterns can be designed under customization. |
Chevron Rubber Conveyor belt for Mining industry
Chevron Conveyor Belts offered are precision designed and developed for providing desired space-saving on steep inclines which can go up to 40 Degrees. In such situations, these conveyor belts are designed to deliver enhanced load carrying capacity in bulk with lump size of up to 150mm.
Features:
Some of the standard features of these conveyor belts include:
* For meeting the demands of high capacity conveying at steep angles
* Designed to prevent load slippage or roll back of products while conveying
* Comes with cleats that are integrally molded with top cover rubber that prevents separation from belt
* Cleats also helping in achieving high abrasion resistance as well as elastic rubber compounds for desired flexibility
* Can be offered in different cleat heights as well as widths depending on application requirements
* Can be made available in varied finish design specifications
* Following precision design standards that ensure belt has smooth run on conventional return idlers, thus needing no conveyor modification
* Belting support provided allowing smooth transition from conventional flat belt to Chevron Conveyor Belts
* Can be manufactured in all cover grades including abrasion resistant M24, HR, OR, FR
* Available in white finish that helps in maintaining better hygiene standards
Application Areas:
Some of the areas of application include for meeting the transportation demands of:
|
Wood Chips |
Sand & Gravel |
|
Heavy Duty Scrap metal |
Minerals – Coal & Ore |
|
Materials – Fine Coal & Grains |
Waste & Recycling Plants |
|
Road Construction |
Crushing Industries |
|
Bagged Materials |
Steel Pellets |
Rubber Conveyor Belt Main application and feature
It can be extensively used for the conveyance of materials in the mining, port, cement, metallurgical and chemical industries.
Standards of Performance:GB/T7984-2001
1. Cotton canvas conveyor belt: A traditional conveyor belt for short distance conveyance.
2. Nylon conveyor belt: Featured in good flexibility, high tension, impact & torsion resistance, less extension and easy trough-making. It is applicable to conveyance of middle-long distance, high speed and more loading capacity. Nylon 6-layers and 66-layers canvas core have almost equivalent tension, nevertheless Nylon-66 has better stability in heat situation.
3. Polyester conveyor belt: High initial modules, good dimensional stability, impact resistance, suitable for middle-long distance, high speed & heavy duty conveyance.
The different widths, patterns, colors, plies, thicknesss, profiles all are available according to your request.
Company Profile
As 1 of Leading Professional Total-solution Manufacturer and Supplier of Conveyor Belt and the Related Machine for 20 years; UYANG BELTING covers an area of 80000 square meters with 15 most advanced production lines of conveyor belt.
Our Main Products are Rubber conveyor belts, Chevroned Rubber conveyor belts and PVC, PU , PVK conveyor belts with various patterns, and the relative machine; They are widely used in Various industries;
At UYANG BELTING ,we focus on improving the quality, reliability, and productivity of our customers’ industrial processes through our unmatched expertise and a vast portfolio of products. Alongside our excellent Quality, we provide excellent service, based on long-term relationships with our customers, partners, suppliers, and colleagues.
Certifications
Packaging & Shipping
FAQ
Q:Are you manufactrer or trading company?
A: we are 1 manufacturer of conveyor belt and relative machine for 20 years;
Q:How about the quality of this product?
A: The quality and performance of our products have reached the advanced level of the European Brand belts;
and the price is more competitive;
Q: How to guarantee the quality of your products?
A: 1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
Q:Can I get the sample to make sure the quality before the order ?
A:Yes,we accept the 1 set sample order before your order.
Q.How long about the delivery time?
A: about 10–20 days after we received the deposit.
Q. What is your payment terms?
A:40% deposit after confirmation and 60% balance before delivery or L/C at sight.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Ep 100— Ep 500 |
|---|---|
| Material: | Rubber |
| Inside Material: | Fabric |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant |
| Tensile Strength: | Strong |
| Place of Origin: | China |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the cost considerations associated with using V-belts in power transmission?
When considering the use of V-belts in power transmission applications, several cost factors should be taken into account. Here are the key cost considerations associated with using V-belts:
- Initial Cost:
- Installation Cost:
- Maintenance Cost:
- Energy Efficiency:
- Replacement and Downtime Costs:
- Overall System Efficiency:
The initial cost of V-belts includes the purchase price of the belts themselves. V-belts are generally cost-effective compared to other power transmission options such as gears or chains. However, the specific cost can vary depending on factors such as belt type, size, and brand.
The installation cost involves the labor and time required to install the V-belts in the power transmission system. Compared to more complex power transmission systems, V-belts are relatively easy to install, requiring minimal specialized tools or expertise. This can result in lower installation costs.
V-belts generally require regular maintenance to ensure optimal performance and longevity. Maintenance activities such as belt tensioning, alignment checks, and periodic replacements contribute to the overall maintenance cost. However, compared to other power transmission systems, V-belts often have lower maintenance costs due to their simplicity.
V-belts offer good energy efficiency, as they typically have low friction losses during power transmission. This can result in lower energy consumption and reduced operating costs over time. Choosing high-quality V-belts with low slip and efficient power transfer characteristics can further enhance energy efficiency.
Over time, V-belts will wear out and require replacement. The frequency of belt replacements will depend on factors such as operating conditions, maintenance practices, and belt quality. Planned belt replacements can help minimize unexpected downtime and associated costs. However, unplanned belt failures can lead to costly downtime, lost production, and potential damage to other system components.
The efficiency of the entire power transmission system should be considered when evaluating costs. While V-belts themselves are relatively efficient, the overall system efficiency can be influenced by factors such as pulley design, alignment, and load conditions. A well-designed and properly maintained V-belt drive system can optimize efficiency and reduce long-term operating costs.
By considering these cost considerations associated with using V-belts in power transmission, you can make informed decisions about the selection, installation, and maintenance of V-belt drive systems to achieve a balance between upfront costs and long-term operational efficiency.
How do you troubleshoot common issues with V-belts, such as slipping or squealing?
Troubleshooting common issues with V-belts, such as slipping or squealing, is essential to maintain the proper operation and efficiency of the belt drive system. Here are some troubleshooting steps to address these issues:
- Slipping:
- Check the belt tension: Insufficient tension is a common cause of slipping. Ensure that the V-belt is properly tensioned according to the manufacturer’s recommendations. Adjust the tension by using the appropriate tensioning method or tools.
- Inspect for wear or damage: Examine the V-belt for signs of wear, cracks, fraying, or other damage. A worn-out belt may not provide adequate grip and can lead to slipping. Replace the belt if necessary.
- Check pulley alignment: Misaligned pulleys can cause the belt to slip. Verify that the pulleys are properly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
- Assess pulley condition: Worn or damaged pulleys can contribute to belt slipping. Inspect the pulleys for wear, rough surfaces, or damage. If needed, replace the pulleys to ensure proper belt engagement.
- Verify the load and application: Excessive loads or improper application can cause the belt to slip. Ensure that the belt drive system is designed and rated for the specific load requirements.
- Squealing:
- Check belt tension: Insufficient or excessive belt tension can lead to squealing. Adjust the tension to the recommended range specified by the manufacturer.
- Inspect for wear or contamination: Check the V-belt for signs of wear, glazing, or contamination. Worn or contaminated belts may produce squealing noises. Replace the belt if necessary and eliminate any contamination from the belt or pulleys.
- Examine pulley condition: Damaged or worn pulleys can create noise. Inspect the pulleys for wear, damage, or rough surfaces. Replace any worn or damaged pulleys.
- Verify pulley alignment: Misaligned pulleys can cause the belt to run at an angle, resulting in noise. Ensure that the pulleys are correctly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
- Check for belt glazing: Belt glazing occurs when the belt’s contact surface becomes smooth and glossy, reducing traction. If glazing is present, roughen the belt’s surface with fine sandpaper or replace the belt if necessary.
- Assess environmental factors: Environmental conditions, such as excessive heat or humidity, can affect belt performance. Ensure that the belt drive system operates within the recommended temperature and humidity ranges.
Slipping occurs when the V-belt fails to maintain proper traction with the pulleys, resulting in reduced power transmission and potential belt wear. To troubleshoot slipping issues:
Squealing noises from V-belts are often caused by vibrations, misalignment, or improper tension. To troubleshoot squealing issues:
By following these troubleshooting steps, you can identify and address common issues with V-belts, such as slipping or squealing. Regular maintenance, proper tensioning, and alignment are crucial for ensuring the smooth and efficient operation of the belt drive system.
What is a V-belt and how does it work?
A V-belt, also known as a Vee belt or a wedge belt, is a type of power transmission belt that is commonly used in various industrial applications. It is called a V-belt because of its trapezoidal cross-sectional shape, resembling the letter “V.”
The primary purpose of a V-belt is to transmit power between two rotating shafts. It does this by wrapping around the pulleys or sheaves on the shafts and creating frictional forces between the belt and the pulleys. The friction generated between the belt and the pulleys allows the belt to transfer torque from the driving pulley to the driven pulley.
The V-belt’s design provides several advantages for power transmission:
- High friction: The V-shaped cross-section of the belt increases the contact area with the pulleys, resulting in high frictional forces. This allows for effective power transmission even in applications with high torque or heavy loads.
- Belt wedging: When the V-belt is tensioned, it wedges itself deeper into the pulley grooves, enhancing the friction and preventing slippage between the belt and the pulleys. This feature is especially useful in applications where the driven pulley needs to rotate at a different speed than the driving pulley.
- Quiet operation: V-belts generally operate with less noise compared to other types of belts, such as flat belts. The V-shaped design helps to reduce vibrations and noise levels during power transmission.
- Simple installation: V-belts are relatively easy to install and replace. They can be quickly mounted on the pulleys without requiring extensive alignment procedures.
However, it’s important to note that V-belts have limitations as well. They are not suitable for applications that require precise speed control or when high-speed ratios are needed. In such cases, other power transmission methods like gear systems or synchronous belts may be more appropriate.
In summary, V-belts are commonly used power transmission belts that utilize frictional forces to transfer torque between rotating shafts. Their V-shaped design and high friction characteristics make them effective for various industrial applications.
editor by CX 2024-04-04