Product Description
Chevron ribbed conveyor belt factory conveyor belt
Chevron Conveyor Belts are precision designed and developed for providing desired space-saving on steep inclines which can go up to 40 Degrees. In such situations, these conveyor belts are designed to deliver enhanced load carrying capacity in bulk with lump size of up to 150mm.
Belt types
♦ Types: Open V, Closed-V, L type, H type, Y type, A type and F type, etc.
♦ Width: 400MM-1200MM
♦ Thickness: 4-50mm
♦ Types: EP80-EP630
♦ Feature: Good adhesion and long working life
Chevron Pattern Conveyor Belt Features
1. Excellent elasticity
2. Anti-impact
3. High-adhesion
4. Good flexibility
5. Trough ability
6. Better stability of size
7. Resistance to water
8. Heat resistance in comparison to NN belt
Advantage :
Some of the standard features of these conveyor belts include:
For meeting the demands of high capacity conveying at steep angles
Designed to prevent load slippage or roll back of products while conveying
Comes with cleats that are integrally molded with top cover rubber that prevents separation from belt
Cleats also helping in achieving high abrasion resistance as well as elastic rubber compounds for desired flexibility
Can be offered in different cleat heights as well as widths depending on application requirements
Can be made available in varied finish design specifications
Following precision design standards that ensure belt has smooth run on conventional return idlers, thus needing no conveyor modification
Belting support provided allowing smooth transition from conventional flat belt to Chevron Conveyor Belts
Can be manufactured in all cover grades including abrasion resistant M24, HR, OR, FR
Available in white finish that helps in maintaining better hygiene standards
Application Areas:
Some of the areas of application include for meeting the transportation demands of:
| Wood Chips | Sand & Gravel |
| Heavy Duty Scrap metal | Minerals – Coal & Ore |
| Materials – Fine Coal & Grains | Waste & Recycling Plants |
| Road Construction | Crushing Industries |
| Bagged Materials | Steel Pellets |
Selections:
Selection the type and height of cleats depends on the material to be conveyed and the angle of inclination:
| Type of material | Material example | Max. angle of inclination | |||
| Height of cleats | |||||
| H(mm): 14 |
H(mm): 16 |
H(mm): 25 |
H(mm): 32 |
||
| Powdery | Flour, etc. | 25° | 25° | 28° | 30° |
| Loose flowing | Corn, barley, wheat, rye, etc. | 20/25° | 20/25° | 25/30° | 25/30° |
| Loose rolling | Gravel, ground stone, etc. | 25° | 25° | 28° | 30° |
| Sticky | Wet sand, ash, wet loam, etc. | 30° | 30/35° | 35/40° | 40/45° |
| Packed | Sacks, paper sacks, etc. | 30/35° | 30/35° | 35/40° | 35/40° |
Cleat pattern ranges
1. Conveyor belts with Close V type profiles
2.Conveyor belts with U type profiles
3.Conveyor belts with Y type profiles
4.Conveyor belts with G type profiles
Picture
Shipping:
Certificate:
FAQ:
(1)Q: Are you a factory or trading company
A: We are factory with export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost,this charge will be deducted from the payment for formal order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T or L/C at sight for large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A etc?
A: Yes, we can do them for you.
Welcome to visit our web: qdbothwin for more conveyor belt and rubber sheet information.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | EP200 |
|---|---|
| Material: | Rubber |
| Inside Material: | Fabric |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant |
| Tensile Strength: | Strong |
| Tensile: | 10-25MPa |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can V-belts be used in environments with high temperatures or humidity?
V-belts can be used in environments with high temperatures or humidity, but it is important to consider the specific conditions and choose the appropriate belt material and design to ensure reliable and long-lasting performance. Here are some considerations regarding the use of V-belts in such environments:
- Temperature Resistance:
- Heat Dissipation:
- Humidity and Moisture:
- Chemical Resistance:
- Regular Inspections and Maintenance:
V-belts are available in different materials that offer varying levels of temperature resistance. Standard V-belts made from materials like rubber or neoprene can typically withstand temperatures within a range of -30°C to 80°C (-22°F to 176°F). However, for applications with higher temperatures, specialized high-temperature belts made from materials like silicone or EPDM (ethylene propylene diene monomer) can be used, which can withstand temperatures up to 150°C (302°F) or even higher.
In high-temperature environments, heat dissipation becomes crucial to prevent belt degradation. Adequate ventilation and cooling measures should be in place to dissipate heat generated during belt operation. This can help maintain the integrity of the belt material and prevent premature wear or failure.
V-belts can generally tolerate moderate levels of humidity and moisture. However, in environments with high humidity or exposure to water, it is important to select belts with moisture-resistant properties. Some V-belts come with special coatings or treatments that enhance their resistance to moisture, preventing swelling, deterioration, or loss of strength.
In certain high-temperature or high-humidity environments, there might be exposure to chemicals or contaminants. It is crucial to choose V-belt materials that are resistant to the specific chemicals present in the environment. Chemical-resistant belts, such as those made from materials like polyurethane or fluorocarbon elastomers, can withstand the effects of chemicals and maintain their performance.
In any environment, but especially in high-temperature or high-humidity conditions, regular inspections and maintenance are essential. Periodic checks for signs of wear, cracking, glazing, or other forms of belt deterioration should be conducted. Prompt replacement of worn-out or damaged belts will help prevent unexpected failures and minimize downtime.
By considering these factors and selecting V-belts specifically designed for high-temperature or high-humidity environments, you can ensure proper performance, longevity, and reliability in such operating conditions.
How do you troubleshoot common issues with V-belts, such as slipping or squealing?
Troubleshooting common issues with V-belts, such as slipping or squealing, is essential to maintain the proper operation and efficiency of the belt drive system. Here are some troubleshooting steps to address these issues:
- Slipping:
- Check the belt tension: Insufficient tension is a common cause of slipping. Ensure that the V-belt is properly tensioned according to the manufacturer’s recommendations. Adjust the tension by using the appropriate tensioning method or tools.
- Inspect for wear or damage: Examine the V-belt for signs of wear, cracks, fraying, or other damage. A worn-out belt may not provide adequate grip and can lead to slipping. Replace the belt if necessary.
- Check pulley alignment: Misaligned pulleys can cause the belt to slip. Verify that the pulleys are properly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
- Assess pulley condition: Worn or damaged pulleys can contribute to belt slipping. Inspect the pulleys for wear, rough surfaces, or damage. If needed, replace the pulleys to ensure proper belt engagement.
- Verify the load and application: Excessive loads or improper application can cause the belt to slip. Ensure that the belt drive system is designed and rated for the specific load requirements.
- Squealing:
- Check belt tension: Insufficient or excessive belt tension can lead to squealing. Adjust the tension to the recommended range specified by the manufacturer.
- Inspect for wear or contamination: Check the V-belt for signs of wear, glazing, or contamination. Worn or contaminated belts may produce squealing noises. Replace the belt if necessary and eliminate any contamination from the belt or pulleys.
- Examine pulley condition: Damaged or worn pulleys can create noise. Inspect the pulleys for wear, damage, or rough surfaces. Replace any worn or damaged pulleys.
- Verify pulley alignment: Misaligned pulleys can cause the belt to run at an angle, resulting in noise. Ensure that the pulleys are correctly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
- Check for belt glazing: Belt glazing occurs when the belt’s contact surface becomes smooth and glossy, reducing traction. If glazing is present, roughen the belt’s surface with fine sandpaper or replace the belt if necessary.
- Assess environmental factors: Environmental conditions, such as excessive heat or humidity, can affect belt performance. Ensure that the belt drive system operates within the recommended temperature and humidity ranges.
Slipping occurs when the V-belt fails to maintain proper traction with the pulleys, resulting in reduced power transmission and potential belt wear. To troubleshoot slipping issues:
Squealing noises from V-belts are often caused by vibrations, misalignment, or improper tension. To troubleshoot squealing issues:
By following these troubleshooting steps, you can identify and address common issues with V-belts, such as slipping or squealing. Regular maintenance, proper tensioning, and alignment are crucial for ensuring the smooth and efficient operation of the belt drive system.
How do you measure and select the right size of V-belt for a specific application?
When selecting the right size of V-belt for a specific application, it is important to consider factors such as the pulley diameters, center distance between the pulleys, power requirements, and the desired operating speed. Here is a step-by-step guide on how to measure and select the appropriate V-belt size:
- Identify the pulley diameters: Measure the diameter of both the driving and driven pulleys. Make sure to measure the diameter at the highest point of the pulley groove where the belt rides.
- Determine the center distance: Measure the distance between the center points of the driving and driven pulleys. This is the center distance and it plays a crucial role in determining the appropriate V-belt length.
- Calculate the pitch diameter: The pitch diameter is the effective diameter where the belt contacts the pulley. It can be calculated using the following formula: Pitch Diameter = (Driving Pulley Diameter + Driven Pulley Diameter) / 2.
- Consider the power requirements: Determine the amount of power that needs to be transmitted by the V-belt. This can be in the form of horsepower (HP) or kilowatts (kW). Refer to the manufacturer’s guidelines or engineering specifications to ensure the selected V-belt can handle the required power.
- Choose the appropriate V-belt type: Based on the calculated pitch diameter, center distance, and power requirements, select the type of V-belt that is suitable for the specific application. Consider factors such as load capacity, speed capability, and environmental conditions.
- Refer to V-belt manufacturer’s catalogs: Consult the manufacturer’s catalogs or online resources to find the available V-belt sizes and corresponding part numbers. Cross-reference the calculated parameters with the provided charts or tables to identify the appropriate V-belt size.
- Verify the selection: Double-check the selected V-belt size against the calculated parameters to ensure accuracy. If possible, consult with a technical expert or the manufacturer’s support team to validate the selection.
It is important to note that V-belt sizes are standardized and typically follow specific designations, such as the Classical V-belt designation (e.g., A, B, C, D) or the metric designation (e.g., SPZ, SPA, SPB, SPC). These designations indicate different belt widths and lengths.
In summary, measuring and selecting the right size of V-belt for a specific application involves identifying the pulley diameters, determining the center distance, calculating the pitch diameter, considering the power requirements, choosing the appropriate V-belt type, referring to manufacturer’s catalogs, and verifying the selection. Following these steps will help ensure the proper functioning and longevity of the V-belt in the intended application.
editor by CX 2024-03-23