Product Description
Good Quality Rubber V-Ribbed Belt Fan Belt Rubber Belt Drive Belt 6pk1115 for Honda/Lada/Suzuki Car 211-00
LADA
2110.104.1571
| HONDA | 38920-P0A-003 |
| HONDA | 38920-P0A-J01 |
| HONDA | 38920-P0A-J02 |
| SUZUKI | 1752184CA0 |
| SUZUKI | 1752184CA0000 |
Description:
L Low-noise operation
L High-efficiency drive
L Accurate transmission
L Anti-cold, Anti-heat, Anti-oil performance
L Abrasion resistance, good tensile strength
L Maintenance-free, high life expectancy
Specifications
Manufacturer PK,Timing,V Belt AND Rubber Brake chamber/Diaphragm With EPDM CR HNBR Material Genuine Original
Quality Warranty 5,0000-8,0000 KM
Why Choose Us?
1.Our Material Of Rubber Is imported .
2.Our Material Of Glass Fiber Cords Are imported from Japan.Warranty 8,0000-10,0000 KM
3.Other Accessories And Subsidiary Materials Are From The good Brand Suppliers.
4.We Are Professional Perfomance Manufacturer PK,Timing,V Belt AND Rubber Brake Diaphragm
5.Transmission Belts Parts OEM Quality PK Belt Manufacturer GENUINE Quality
| Type | Timing Belt/Cogged V Belt/Wrapped V Belt/ PK Belt/Conveyor Belt/Speed Belt/Fan Belt/ Flat Belt/Ribbed Belt/Round Belt/Banded Belt/ Industrial Synchronous Belt/RUBBER BRAKE DIAPHRAGM |
Material | 1.Rubber is imported from USA and Germany. 2.Glass fiber cords are imported from Japan and Germany. Other accessories and subsidiary materials are from the good brand suppliers now. |
| Information 1 | Belt warranty 5,0000-8,0000 KM | Brand | AIWO,CUSTOMER’S BRAND |
| Information 2 | Manufacturer PK Belt | Certification | TS16949/ISO9001 So On |
| Information 3 | GENUINE Quality | Warranty | 100% CR life span 50,000 to 80,000 kilometers |
| Packaging Size |
Can Be Customized | Delisvery Time |
20-45 Days(depends on order quantity) |
FAQ
1) How can I place order?
A:You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A:After you confirm our PI, we will request you to pay.T/T (bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A:First we discuss order details, production details by email or TM.Then we issue you an PI for your confirmation.You will be requested to do pre-paid full payment or deposit before we go into production.After we get the deposit, we start to process the order.We usually need 7-15days if we don’t have the items in stock.Before production has been finished, we will contact you for shipment details, and the balance payment.After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A:Replacement.If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A:We have spot inspection and finished product inspection.We check the goods when they go into next step production procedure. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Conveyor Belt |
|---|---|
| Feature: | Wear-resistant, Heat-resistant, Tear-resistant, Flame-resistant, Cold-resistant |
| Performance: | Strong Rubber Conveyor Belt |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do you calculate the power rating and speed capacity of a V-belt system?
Calculating the power rating and speed capacity of a V-belt system involves considering various factors such as belt type, pulley dimensions, belt tension, and speed. Here’s a general overview of the calculations involved:
- Power Rating Calculation:
- Speed Capacity Calculation:
To calculate the power rating of a V-belt system, you need to determine the maximum power that the belt can transmit without slipping or experiencing excessive wear. The power rating is typically expressed in horsepower (HP) or kilowatts (kW).
The formula for calculating the power rating is:
Power (HP or kW) = (Tension in belt (lb or N) * Belt speed (ft/min or m/s)) / 33,000 (for HP) or 1,000 (for kW)
The tension in the belt can be determined based on the design requirements of the system and is influenced by factors such as the type of application and the desired safety factor.
The speed capacity of a V-belt system is the maximum rotational speed at which the belt can operate without experiencing excessive vibration or failure. It is typically expressed in revolutions per minute (RPM).
The formula for calculating the speed capacity is:
Speed (RPM) = (Belt pitch diameter (in or mm) * π * Belt speed (ft/min or m/s)) / 12 (for in) or 1000 (for mm)
The belt pitch diameter is determined based on the pulley dimensions and is the effective diameter at which the belt engages with the pulley.
It’s important to note that these calculations provide general guidelines, and actual power rating and speed capacity may vary depending on the specific belt and pulley design, as well as other factors such as belt tensioning, environmental conditions, and system efficiency. It is recommended to consult the belt manufacturer’s guidelines or seek assistance from an engineer experienced in power transmission systems to ensure accurate calculations and appropriate belt selection for a given application.
What are the factors that affect the lifespan and efficiency of V-belts?
The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:
- Belt Tension:
- Belt Alignment:
- Belt Condition:
- Maintenance and Lubrication:
- Operating Conditions:
- Load and Application:
Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.
Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.
The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.
Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.
Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.
The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.
By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.
What is a V-belt and how does it work?
A V-belt, also known as a Vee belt or a wedge belt, is a type of power transmission belt that is commonly used in various industrial applications. It is called a V-belt because of its trapezoidal cross-sectional shape, resembling the letter “V.”
The primary purpose of a V-belt is to transmit power between two rotating shafts. It does this by wrapping around the pulleys or sheaves on the shafts and creating frictional forces between the belt and the pulleys. The friction generated between the belt and the pulleys allows the belt to transfer torque from the driving pulley to the driven pulley.
The V-belt’s design provides several advantages for power transmission:
- High friction: The V-shaped cross-section of the belt increases the contact area with the pulleys, resulting in high frictional forces. This allows for effective power transmission even in applications with high torque or heavy loads.
- Belt wedging: When the V-belt is tensioned, it wedges itself deeper into the pulley grooves, enhancing the friction and preventing slippage between the belt and the pulleys. This feature is especially useful in applications where the driven pulley needs to rotate at a different speed than the driving pulley.
- Quiet operation: V-belts generally operate with less noise compared to other types of belts, such as flat belts. The V-shaped design helps to reduce vibrations and noise levels during power transmission.
- Simple installation: V-belts are relatively easy to install and replace. They can be quickly mounted on the pulleys without requiring extensive alignment procedures.
However, it’s important to note that V-belts have limitations as well. They are not suitable for applications that require precise speed control or when high-speed ratios are needed. In such cases, other power transmission methods like gear systems or synchronous belts may be more appropriate.
In summary, V-belts are commonly used power transmission belts that utilize frictional forces to transfer torque between rotating shafts. Their V-shaped design and high friction characteristics make them effective for various industrial applications.
editor by CX 2024-05-09