Product Description
We have the most moulds and good quality of Variable Speed V Belt in the leading position in China, this belt is good in bending-resistant performance, small in streching rate and high in strength; besides, it’s durable under oil, hot, aging and CZPT atmos-phere, it’s also good in anti cracking performance.
| Structure: Cover fabric: The Nylon 66 fabric with high spandex as the tooth protection materials. Cushioning layers: The imported CR rubber or EPDM rubber embedding compound Reinforcement: The imported low-stretch polyester tension cord with excellent quality from Japanese company or German company. Belt base: The imported CR rubber or EPDM rubber with traverse fiber compound. Moulded cog fabric: The Nylon 66 fabric with high spandex as the tooth protection materials. |
|||
| Characteristics: 1. Efficient power transmission with minimized wasteful heat generation. 2. Provides high stability and minimizes deflection. 3. Belts handle high temperatures very well. 4. Belts are oil resistant & anti-static. 5. Belts utilize stiff polyester cords for length stability. 6. Belts are designed with textile fibers oriented in the compound of the belt for strength. 7. Belt sides contain abrasion resistant properties contributing to a longer belt life. |
|||
| Double teeth Structure: Cover fabric: The Nylon 66 fabric with high spandex as the tooth protection materials. Cushioning layers: The imported CR rubber or EPDM rubber embedding compound Reinforcement: The imported low-stretch polyester or aramid tension cord Belt base: The imported CR rubber or EPDM rubber with traverse aramid fiber compound. Moulded cog fabric: The Nylon 66 fabric with high spandex as the tooth protection materials. |
|||
| Characteristics: • extremely high acceptance of axial loads • high flexibility and flexing rate • better heat emission • use with small pulley diameters • high running smoothness with high belt speeds • high traverse stability • exceptionally smooth running • wear and slip resistance • long operational life |
|||
| Application: The advantages of the SMSOUTH KB banded v belt with aramid tension cords become obvious when dealing with heavy loaded drives in mechanical engineering and in the agricultural machine industry. These SMSOUTH KB provide the highest possible level of reliability wherever high temperature impacts and low adjustment ranges are present. The SMSOUTH POWER BELT in the aftermarket range includes belts to fit machines manufactured by: John Deere, Laverda, Agco (Massey Ferguson), CZPT Fahr, Case, PZ, JF, Mengele, and many more. |
|||
| Section | Top Width(mm) | Pitch Width(mm) | Height(mm) |
| HG | 16.5 | 15.4 | 8 |
| HH | 20.4 | 19 | 10 |
| HI | 25.4 | 23.6 | 12.7 |
| HJ | 31.8 | 29.6 | 15.1 |
| HK | 38.1 | 35.5 | 17.5 |
| HL | 44.5 | 41.4 | 19.8 |
| HM | 50.8 | 47.3 | 22.2 |
| HN | 57.2 | 53.2 | 23.9 |
| HO | 63.5 | 59.1 | 25.4 |
Our advantages:
1) Strict and scientic management team
2) Prompt delivery
3) Reliable services
4) Rich experience for more than 30 years of manufacturing and exporting
5) OEM acceptable
6) Small order acceptable
7) Reasonable and competitive prices
FAQ:
1. How many years have you been in hose/belt business?
30 years
2. Do you have big and famous customer? How many years do you cooperate with them?
Yes, we are cooperating with a big multinational company in USA more than 15 years. We are the sole purchasing agency of the company in China.
3. What about your quality level?
Because we export big amount to the multinational company, our quality of all productions are in high level. Our products have been satisfied with our customer more than 15 years.
4. Which countries are your main sales?
America, South America, Africa,Midde East Countries,Australia, New Zealand,Europe
5. What’s your acceptable payment terms?
T/T and L/C are acceptable, other payments can be negotiated.
6. How long is the delivery time?
Usually we can effect shipment within 20 days after confirming the order, but for coupling, it will be a little long ,about 45 days.
7.The how about the packing?
The packing are plastic paper, woven bag, pallet and carton as per the items ordered.
8. What’s the Minimum order quantity?
The minimum order amount is USD3500.
9. Can we place belt,hose, fitting , coupling, rubber sheet all are in small order, and ship together?
Sure, we can do. Each week, we have lots of goods are waitting to ship. We can consolidtae all goods in 1 container. It’s our advantage
10.What are the quality standards passed?
FDA,ISO,SGS,ROHS,REACH
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Feature: | Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant, High Temperature-Resistance |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do you calculate the power rating and speed capacity of a V-belt system?
Calculating the power rating and speed capacity of a V-belt system involves considering various factors such as belt type, pulley dimensions, belt tension, and speed. Here’s a general overview of the calculations involved:
- Power Rating Calculation:
- Speed Capacity Calculation:
To calculate the power rating of a V-belt system, you need to determine the maximum power that the belt can transmit without slipping or experiencing excessive wear. The power rating is typically expressed in horsepower (HP) or kilowatts (kW).
The formula for calculating the power rating is:
Power (HP or kW) = (Tension in belt (lb or N) * Belt speed (ft/min or m/s)) / 33,000 (for HP) or 1,000 (for kW)
The tension in the belt can be determined based on the design requirements of the system and is influenced by factors such as the type of application and the desired safety factor.
The speed capacity of a V-belt system is the maximum rotational speed at which the belt can operate without experiencing excessive vibration or failure. It is typically expressed in revolutions per minute (RPM).
The formula for calculating the speed capacity is:
Speed (RPM) = (Belt pitch diameter (in or mm) * π * Belt speed (ft/min or m/s)) / 12 (for in) or 1000 (for mm)
The belt pitch diameter is determined based on the pulley dimensions and is the effective diameter at which the belt engages with the pulley.
It’s important to note that these calculations provide general guidelines, and actual power rating and speed capacity may vary depending on the specific belt and pulley design, as well as other factors such as belt tensioning, environmental conditions, and system efficiency. It is recommended to consult the belt manufacturer’s guidelines or seek assistance from an engineer experienced in power transmission systems to ensure accurate calculations and appropriate belt selection for a given application.
Are there any safety considerations when working with V-belts?
Working with V-belts involves certain safety considerations to ensure the well-being of personnel and the proper functioning of the belt drive system. Here are some important safety considerations when working with V-belts:
- Lockout/Tagout: Before performing any maintenance or adjustment on a belt drive system, it is crucial to follow proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent unintentional startup or release of stored energy. This ensures the safety of personnel working on or near the V-belts.
- Personal Protective Equipment (PPE): When working with V-belts, appropriate personal protective equipment should be worn as per the specific tasks and potential hazards. This may include safety glasses, gloves, hearing protection, and protective clothing to safeguard against potential injury from flying debris, pinch points, or contact with rotating parts.
- Training and Familiarity: Ensure that personnel working with V-belts are adequately trained on safe work practices, including proper maintenance procedures, tensioning techniques, and the use of tools and equipment. Familiarity with the specific belt drive system and understanding the potential hazards associated with V-belts is essential for safe operation.
- Machine Guarding: Install appropriate machine guarding to prevent accidental contact with moving V-belts and exposed pulleys. Guards should be designed to prevent access to hazardous areas and comply with relevant safety regulations. Regularly inspect and maintain the guards to ensure their effectiveness.
- Tensioning and Adjustment: Follow proper procedures when tensioning or adjusting V-belts. Use the recommended tools and techniques specified by the manufacturer. Improper tensioning can lead to belt slippage, increased wear, and potential accidents. Avoid working near or reaching into the belt drive system while it is in operation.
- Proper Lifting and Handling: V-belts can be heavy and awkward to handle, especially in larger sizes. When lifting or handling V-belts, use proper lifting techniques and equipment to prevent strains or injuries. Avoid placing excessive stress on the belts during installation or removal.
- Maintaining Cleanliness: Keep the work area clean and free from debris, oil, or other contaminants that may affect traction or create slip hazards. Clean up any spills promptly and use appropriate cleaning methods to avoid slipping or tripping accidents.
- Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines, instructions, and specifications for the installation, tensioning, maintenance, and replacement of V-belts. Manufacturers provide valuable information on safe operating practices, recommended tension ranges, load capacities, and other relevant safety considerations specific to their V-belt products.
By following these safety considerations when working with V-belts, you can help mitigate potential hazards, reduce the risk of accidents, and ensure the safe and efficient operation of the belt drive system.
What is a V-belt and how does it work?
A V-belt, also known as a Vee belt or a wedge belt, is a type of power transmission belt that is commonly used in various industrial applications. It is called a V-belt because of its trapezoidal cross-sectional shape, resembling the letter “V.”
The primary purpose of a V-belt is to transmit power between two rotating shafts. It does this by wrapping around the pulleys or sheaves on the shafts and creating frictional forces between the belt and the pulleys. The friction generated between the belt and the pulleys allows the belt to transfer torque from the driving pulley to the driven pulley.
The V-belt’s design provides several advantages for power transmission:
- High friction: The V-shaped cross-section of the belt increases the contact area with the pulleys, resulting in high frictional forces. This allows for effective power transmission even in applications with high torque or heavy loads.
- Belt wedging: When the V-belt is tensioned, it wedges itself deeper into the pulley grooves, enhancing the friction and preventing slippage between the belt and the pulleys. This feature is especially useful in applications where the driven pulley needs to rotate at a different speed than the driving pulley.
- Quiet operation: V-belts generally operate with less noise compared to other types of belts, such as flat belts. The V-shaped design helps to reduce vibrations and noise levels during power transmission.
- Simple installation: V-belts are relatively easy to install and replace. They can be quickly mounted on the pulleys without requiring extensive alignment procedures.
However, it’s important to note that V-belts have limitations as well. They are not suitable for applications that require precise speed control or when high-speed ratios are needed. In such cases, other power transmission methods like gear systems or synchronous belts may be more appropriate.
In summary, V-belts are commonly used power transmission belts that utilize frictional forces to transfer torque between rotating shafts. Their V-shaped design and high friction characteristics make them effective for various industrial applications.
editor by CX 2023-11-16